MFP OPTIONS: B246 SERIES 15 February 2006
1-180
8. Attach the decal near the machine name on the copier.
9. Obey the procedures in the operating instructions to do the user settings.
10. Replace the old keytops [A] with the new keytops [B].
11. Make sure that these SP commands are set correctly:
• SP5985 001: Device Setting - On Board NIC (Set to "1" Enable)
• SP5985 002: Device Setting – On Board USB (Set to "1" Enable)
• SP5811 – Machine No. Setting
• SP5907 – Plug & Play
B841I103.WMF
[A]
[B]
To Next Page
Loading...
Need help?
General
