Ricoh MT-C1 User Manual

15 February 2006 MFP OPTIONS: B246 SERIES
1-193
Installation
Here is a list of error codes that may appear during Cumin installation.
Error Code Cause
Illegal Modem Parameter Error
-11001 Chat parameter error
-11002 Chat execution error
-11003 Unexpected error
Procedure or Setting Errors
-12002
Cumin device attempted to register itself at Remote Center
without reference to Cumin registration at Remote Center
-12003 Registration attempted without certification.
-12004
Installation attempted by inputting machine number with illegal
certification or illegal ID2 illegal (05A).
-12005
Notification or registration done when transmission with the
Remote Center is disabled or with Cumin set in illegal status.
-12006 Reference executeion with Box registration completed.
-12007
Final registration executed with a number different from the
request number.
-12008
Certification update failed because a job was in progress or for
some other reason.
Errors Caused by GW Controller Response
-2385
When installation was attempted outside Japan, the Box Tel No
included a domestic (Japan) dial up reference not applicable
overseas.
-2387 Not supported at Remote Center.
-2389 Database corrupted
-2390 Program corrupted
-2391 Device registration duplicated
-2392 Parameter error
-2393 Basil unit not registered
-2394 Device not registered
-2395 Basil Box ID illegal
-2396 Basil Device ID illegal
-2397 ID2 format incompatible
-2398 Format of request number incompatible.

Ricoh MT-C1 Specifications

General

Brand	Ricoh
Model	MT-C1
Category	All in One Printer
Language	English