PAPER FEED 15 February 2006
3-104
11. Remove the rear bottom plate [A] ( x 1).
12. Re-position the return position sensor bracket [B] ( x 1).
To use the paper tray for A4 size, set the screw in the left hole as shown. (For
LT size, the screw should be placed on the right.)
13. Reinstall the rear bottom plate.
14. Input the new paper size into SP5959-001 (Paper Size – Tray 1). For details,
see SP5959 in section “4. Service Tables”.
15. Do the scanner and printer adjustments. (☛ 3.14)
B246R1066.WMF
[A]
[B]
To Next Page
Loading...
