Ricoh MT-C1 - Page 481

RESETS 15 February 2006
5-8
B246 Series
Memory Clear (B246) 5801
Resets NVRAM data to the default settings. Before executing any of these SP
codes, print an SMC Report.
001
All Clear Initializes items 2 ~ 15 below.
002
Engine Clear Initializes all registration settings for the engine and copy
process settings.
003
SCS Initializes default system settings, SCS (System Control
Service) settings, operation display coordinates, and
ROM update information.
004
IMH Memory Clear Initializes the image file system.
(IMH: Image Memory Handler)
005
MCS Initializes the automatic delete time setting for stored
documents.
(MCS: Memory Control Service)
006
Copier application Initializes all copier application settings.
007
Fax application
Initializes the fax reset time, job login ID, all TX/RX
settings, local storage file numbers, and off-hook
timer.
008
Printer application Initializes the printer defaults, programs registered, the
printer SP bit switches, and the printer CSS counter.
009
Scanner application Initializes the defaults for the scanner and all the
scanner SP modes.
010
Web Service/Network
application
Deletes the Netfile (NFA) management files and
thumbnails, and initializes the Job login ID.
Netfiles: Jobs to be printed from the document server
using a PC and the DeskTopBinder software
011
NCS Initializes the system defaults and interface settings (IP
addresses also), the SmartNetMonitor for Admin
settings, WebStatusMonitor settings, and the TELNET
settings.
(NCS: Network Control Service)
012 R-FAX Initializes the job login ID, SmartNetMonitor for
Admin, job history, and local storage file numbers.
014
Clear DCS Setting Initializes the DCS (Delivery Control Service) settings.
015 Clear UCS Setting
Initializes the UCS (User Information Control Service)
settings.
016 MIRS Setting
Initializes the MIRS (Machine Information Report
Service) settings.
017 CCS Initializes the CCS (Certification and Charge-control
Service
) settings.
018 SRM Clear
Initializes the SRM (System Resource Manager)
settings.
019 LCS Clear
Initializes the LCS (Log Count Service) settings.