Ricoh MT-C1 - Page 512

15 February 2006 SERVICE PROGRAM MODE TABLES
5-39
Service
Tables
2301* Transfer Curr. Adj.
Adjusts the current applied to the transfer belt during copying.
Note: If this SP is too high, toner on the paper can go back to the drum.
001 Front [10~200/1 µA]
002 Back [10~200/1 µA]
003 By-pass Image Development: Front Side [10~200/1 µA]
004 Postcard (Japan Only) [10~200/1 µA]
005 Paper Interval [10~200/1 µA]
006 Tab Paper [10~200/1 µA]
007 Thick Paper: Front Side [10~200/1 µA]
008 OHP: Front Side [10~200/1 µA]
009 Tracing Paper: Front Side [10~200/1 µA]
010 Image Leading Edge DFU [10~200/1 µA]
011 Image Trailing Edge DFU [10~200/1 µA]
2310* LCT Trans. Curr. Adj. DFU
Adjusts the current applied to the transfer belt during copying and paper feed from
the LCT.
001 Main Unit Image Development: Front [10~200/1 µA]
002 Main Unit Image Development: Back
003 Image Leading Edge: Back
004 Image Trailing Edge: Back
005 Image Leading Edge: Thick Paper [10~200/1 µA]
006 Image Trailing Edge: Thick Paper
2311* Tray 1 Trans. Curr. Adj. DFU
Adjusts the current applied to the transfer belt during copying and paper feed from
Tray 1.
001 Image Leading Edge: Front [10~200/1 µA]
002 Image Trailing Edge: Front
003 Image Leading Edge: Back
004 Image Trailing Edge: Back
005 Image Leading Edge: Thick Paper [10~200/1 µA]
006 Image Trailing Edge: Thick Paper
2312* Tray 2 Trans. Curr. Adj. DFU
Adjusts the current applied to the transfer belt during copying and paper feed from
Tray 2.
001 Image Leading Edge: Front [10~200/1 µA]
002 Image Trailing Edge: Front
003 Image Leading Edge: Back
004 Image Trailing Edge: Back
005 Image Leading Edge: Thick Paper [10~200/1 µA]
006 Image Trailing Edge: Thick Paper