15 February 2006 SERVICE PROGRAM MODE TABLES
5-69
Service
Tables
5113* Optional Counter Type
001 Default Optional Counter Type
Selects the type of counter:
0: None
1: Key card (RK3, 4) Japan only
2: Key card down (countdown type)
3: Pre-paid card
4: Coin Lock
5: MF key card
11: Exp Key Card (Add)
12: Exp Key Card (Deduct)
002 External Optional Counter Type
Enables the SDK (Software Development Kit) application. This lets you select a
number for the external device for user access control.
[0~3/1]
0: No external devices.
1: External device 1 – key card
2: External device 2 – key card (countdown type)
3: External device 3 – pre-paid card
5118* Disable Copying
Temporarily denies access to the machine. Japan Only
[0~1/1]
0: Release for normal operation
1: Prohibit access to machine
5120* Mode Clear Opt. Counter Removal
Do not change. Japan Only
[0~2/1]
0: Yes. Normal reset
1: Standby. Resets before job start/after completion
2: No. Normally no reset
5121* Counter Up Timing
Determines whether the optional key counter counts up at paper feed-in or at
paper exit. Japan Only
[0~1/1]
0: Feed count
1: No feed count
5126 F Original Size Selection
Sets the original size that the machine detects for F sizes.
[0~2/1]
0: 8hf x 13
1: 8hf x 13qr
2: 8 x 13
Note: hf = 1/2, qr = 1/4
To Next Page
Loading...
