15 February 2006 SERVICE PROGRAM MODE TABLES
5-105
Service
Tables
Initialize All Settings & Address Book 046
The SP clears all the setting information managed in UCS and address book
information (local, delivery, LDAP) and restores these settings to their default
values. Use this SP to initial the account information (user codes and passwords)
for system managers and users as well.
Note:
• Be sure to cycle the machine off and on after you execute this SP code.
• Once this SP has been executed, a message on the screens of applications
that use the address book will prompt users that the address book is being
updated. This prevents the machine from issuing SC870.
• The machine initializes to determine if the address book is stored on the HDD
or on an SD card. In order for the machine to determine whether to recognize
an address book on the HDD or the SD card, the machine must be cycled off
and on once more to determine whether the machine should recognize the
address book on the HDD or the SD card.
Initialize Local Address Book 047
Clears all of the address information from the local address book of a machine
managed with UCS.
Initialize Delivery Addr Book 048
Push [Execute] to delete all items (this does not include user codes) in the
delivery address book that is controlled by UCS.
Initialize LDAP Addr Book 049
Push [Execute] to delete all items (this does not include user codes) in the LDAP
address book that is controlled by UCS.
Initialize All Addr Book 050
Clears everything (including users codes) in the directory information managed
by UCS. However, the accounts and passwords of the system administrators are
not deleted.
Backup All Addr Book 051
Uploads all directory information to the SD card.
Restore All Addr Book 052
Downloads all directory information from the SD card.
Clear Backup Info. 053
Deletes the address book uploaded from the SD card in the slot. Deletes only the
files uploaded for that machine. This feature does not work if the card is write-
protected.
Note: After you do this SP, go out of the SP mode, turn the power off. Do not
remove the SD card until the Power LED stops flashing.
Search Option
This SP uses bit switches to set up the fuzzy search options for the UCS local
address book.
Bit Meaning
0 Checks both upper/lower case characters
1
2
3
Japan Only
4 --- Not Used ---
5 --- Not Used ---
6 --- Not Used ---
060
7 --- Not Used ---