SERVICE PROGRAM MODE TABLES 15 February 2006
5-110
5856 Remote ROM Update
When set to “1” allows reception of firmware data via the local port (IEEE 1284)
during a remote ROM update. This setting is reset to zero after the machine is
cycled off and on. Allows the technician to upgrade the firmware using a parallel
cable
[0~1/1]
0: Not allowed
1: Allowed
5857 Save Debug Log (B140)
001 On/Off (1:ON 0:OFF)
Switches on the debug log feature. The debug log cannot be captured until this
feature is switched on.
[0~1/1]
0: OFF
1: ON
002 Target (2: HDD 3: SD Card)
Selects the destination where the debugging information generated by the event
selected by SP5858 will be stored if an error is generated
[2~3 /1]
2: HDD
3: SD Card
005 Save to HDD
Specifies the decimal key number of the log to be written to the hard disk. (☛5.8.1)
006 Save to SD Card
Specifies the decimal key number of the log to be written to the SD Card. (☛5.8.1)
009 Copy HDD to SD Card (Latest 4 MB)
Takes the most recent 4 MB of the log written to the hard disk and copies them to the
SD Card. (☛5.8.2)
A unique file name is generated to avoid overwriting existing file names on the SD
Card. Up to 4MB can be copied to an SD Card. 4 MB segments can be copied one
by one to each SD Card.
010 Copy HDD to SD Card Latest 4 MB Any Key)
Takes the log of the specified key from the log on the hard disk and copies it to the
SD Card. (☛5.8.2)
A unique file name is generated to avoid overwriting existing file names on the SD
Card. Up to 4 MB can be copied to an SD Card. 4 MB segments can be copied one
by one to each SD Card. This SP does not execute if there is no log on the HDD with
no key specified.
011 Erase HDD Debug Data
Erases all debug logs on the HDD
012 Erase SD Card Debug Data
Erases all debug logs on the SD Card. If the card contains only debugging files
generated by an event specified by SP5858, the files are erased when SP5857 010
or 011 is executed.
To enable this SP, the machine must be cycled off and on.
013 Free Space on SD Card
Displays the amount of space available on the SD card.