SERVICE PROGRAM MODE TABLES 15 February 2006
5-114
5875 SC Auto Reboot (B140/B246)
This SP determines whether the machine reboots automatically when an SC error
occurs.
Note: The reboot does not occur for Type A SC codes.
001 Reboot Setting [0~1/*/1]
0: On, 1: Off
*DOM: (Japan Only) default: 0 (Reboots automatically) The
machine reboots automatically when the machine issues an SC
error and logs the SC error code. If the same SC occurs again,
the machine does not reboot.
*EXP (Outside Japan) default: 1 (Does not reboot automatically.
Changing this setting to "0" sets the machine to reboot
automatically after an SC occurs.
002 Reboot Type This setting determines how the machine reboots after an SC
code is issued.
[0~1/*/1]
0: Allows manual reboot, 1: Automatic reboot
*DOM (Japan Only) default: 1 Automatic reboot
*EXP (Outside Japan) default: 0 Manual reboot
5878 Option Setup
This SP enables the DOS application (Data Overwrite Security). Do this SP after
installing Data Overwrite Security Unit C B735.
5885
Document Svr Access Control DFU
This SP is a bit switch setting.
Bit Meaning
0
Forbid all document server access
(1)
1 Forbid user mode access (1)
2 Forbid print function (1)
3 Forbid fax TX (1)
4 Forbid scan sending (1)
5 Forbid downloading (1)
6 Forbid delete (1)
020
7 Reserved
Permit ROM Update DFU
5886
This SP determines whether the ROM can be updated.
[0-1/0/1]
0: On
1: Off
To Next Page
Loading...
Need help?
General
