15 February 2006 SERVICE PROGRAM MODE TABLES
5-127
Service
Tables
6126 Fold Position Setting
This SP corrects the folding position when paper is stapled and folded in the Booklet
Finisher.
001 A3 SEF
002 B4 SEF
003 A4 SEF
004 B5 SEF
005 12"x18" SEF
006 DLT SEF
007 LG SEF
008 LT SEF
009 Custom Size
[-3~+3/0/0.2 mm]
+ Value: Shifts staple position toward the crease.
- Value: Shifts staple position away from the crease.
Feed Out
Feed OutFeed Out
Feed Out
B132S924.WMF
6128 Fine Adj Z-Fold 1
Use this SP code to adjust the position of the first fold [A]. This adjustment
decreases or increases the distance (
A) between the leading edge [B] and the
crease of the 2nd fold [C].
[-2 to +4/0/ 0.2 mm]
001 1st Fold: A3 SEF
002 1st Fold: B4 SEF
003 1st Fold: A4 SEF
004 1st Fold: DLT SEF
005 1st Fold: LG SEF
006 1st Fold: LT SEF
007 1st Fold: Other
008 2nd Fold: A3 SEF
009 2nd Fold: B4 SEF
010 2nd Fold: A4 SEF
011 2nd Fold: DLT SEF
012 2nd Fold: LG SEF
013 2nd Fold: LT SEF
014 2nd Fold: Other
016 2nd Fold: A3 SEF
A
L1
B234S904.WMF
To Next Page
Loading...
