Ricoh MT-C1 - Page 599

SERVICE PROGRAM MODE TABLES 15 February 2006
5-126
6120* Staple Jogger Adjustment (B246)
Horizontal folding skew can occur when the distance between the jogger fences
and paper edges is not within 0 to 0.5 mm. This SP allows the jogger fences to be
moved away from or closer to the edges of the stack to achieve this target
distance.
001 A3
002 B4
003 A4T (SEF)
004 A4Y (LEF)
005 B5T (SEF)
006 B5Y (LEF)
007 DLT
008 LG
009 LTT ( LT SEF)
010 LTY (LT LEF)
011 Other
[-1.5~+1.5/0.5 mm]
A higher value moves the fence away from the paper,
while a lower value brings the fences closer in.
6121 Finisher Input Check:
Finisher 1
Displays the signals received from sensors and switches
of the finisher. (☛5.6.7)
6122 Finisher Input Check:
Finisher 2
Displays the signals received from sensors and switches
of the finisher. (☛5.6.9)
6124 Finisher Output Check:
Finisher 1
Turn on the electrical components of the finisher
individually for test purposes. (☛ 5.6.8
6125 Finisher Output Check:
Finisher 2
Turn on the electrical components of the finisher
individually for test purposes. (☛ 5.6.10