SERVICE PROGRAM MODE TABLES 15 February 2006
5-146
7842 LS Clear: Prints by Size (B064)
Press Execute to clear counter SP7323 (Doc. Svr – Print Size Display).
7843 LS Clear: Print Job Logins (B064)
Press Execute to clear counter SP7324 (Doc. Svr. – Print Job Counter).
7844 LS Clear: Print to Page Distr. (B064)
Press Execute to clear SP7325 (Doc. Svr. – Job Count (Page No.).
7845 LS Clear: Print Job File Distr. (B064)
Press Execute to clear SP7326 (Doc. Svr – Job Count (File No.)
7846 LS Clear: Print Job Copies Distr. (B064)
Press Execute to clear SP7327 (Doc. Svr. – Job Count (Set No.
7847 LS Clear: Number of Pages by Mode (B064)
Press Execute to clear SP7328 (Doc. Svr – Job Count (Print Mode).
7848 Copy: All Clear (B064)
Press Execute to clear the following SP codes: SP7301, SP7304, SP7305,
SP7306, SP7320, SP7321, SP7323, SP7324, SP7325, SP7326, SP7327,
SP7328.
7852 ADF Scan Glass (B140)
Displays the count for the number of times the machine detected dust on the ADF
exposure glass strip at the beginning of copy jobs.
Count range: 00000 to 65535
The count is done only when SP4020 001 has been switched on (Default: Off).
For more, see SP4020.
001 Dust Counter Total count for the number of times the dust warning message
was issued on the operation panel. This warning is issued
before the original is copied if there is dust on the ADF
exposure glass.
[0~1/1]
0: Off
1: On
This counter does not operate if SP4020-001 is switched off.
0002 Clear Counter This counts how many times the machine moves the scanner to
a different leading edge position to correct the above problem.
7901 Assert Info.
001 Filename
002 Line No.
003 Value
Used for debugging. DFU
7911 Firmware Version (B064) Displays the version numbers of all firmware in the
system.
7990 Status of Issued SC (B064) Displays the following information about the most
recently issued SC: 1) Source file name, 2) SC
number, 3) Result
To Next Page
Loading...
Need help?
General
