SATO CT4-LX User Manual

147
11. Select whether to enable or disable the Label Waste Prevention function, and then
tap or slide the screen to the left.
• This is not displayed if the optional dispenser unit or linerless cutter unit is installed.
• When using linerless labels, journal paper, or RFID tags, you cannot use the Label
Waste Prevention function.
12. Tap [Edit].
To accurately execute the Label Waste Prevention function, register the length of the media.
Register the range of the label length (including liner) that the following illustration shows.
(1) Label length (including liner)
(2) Label

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz