SATO CT4-LX User Manual

231
Commands
Prioritize the settings through commands.
Settings
Prioritize the settings through the product.
[SDPL Measure Unit]
Set whether to prioritize the settings through the product or through commands for the measurement
unit setting.
The options are as follows:
Commands
Prioritize the settings through commands.
Settings
Prioritize the settings through the product.
[Scalable Font Style]
Set whether to prioritize the settings through the product or through commands for the scalable font
style settings.
The options are as follows:
Commands
Prioritize the settings through commands.
Settings
Prioritize the settings through the product.
[Sensor Type]
Set whether to prioritize the settings through the product or through commands for the sensor type
setting.
The options are as follows:
Commands
Prioritize the settings through commands.
Settings
Prioritize the settings through the product.
[Feedback Character]
Set whether to prioritize the settings through the product or through commands for the feedback
character setting.
The options are as follows:
Commands
Prioritize the settings through commands.

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz