SATO CT4-LX - Page 249

249
[OCR Font]
Set whether to print old OCR-B font characters.
Print using OCR-B font for old characters.
Print using OCR-B font for new characters.
[Jornal Font]
Set whether to use X21 font for journal printing.
Use X21 font.
Use S font.
[Character pitch]
Set whether the parameter specified by the character pitch <P> command is enabled until the next
specification is made.
The specified parameter is enabled until the next specification is made.
The specified parameter is enabled in the field.
[Volatilize Parameters]
Set whether to return the setting values specified by the following commands to their current values
when the product's power is turned off.
• Print mode <PM>
• Print speed <CS>
• Print darkness <#E>
• Base reference point <A3> (without (+/-) sign)
• Sensor type <IG>
• Print method <PH>
• Paper specification <YE>
The set values are returned to their current setting values when the product's power is turned off.