SATO CT4-LX - Page 398

Printing RFID Tag Errors
398
TAG NOT FOUND Error in RFID Write
Command
(1) Feed direction
(2) The origin of the range specified by the media size <A1> command
(3) The range specified with the media size <A1> command
If the range is not specified by the media size <A1> command, the product prints the RFID error using
a fixed size of P30 X W40 mm (P1.18" X W1.57"). When a character overlaps with the slash, the
character will inverse from black to white.
WRITE TAG ERROR in RFID Write Command Read Error in UID/EPC/IDm Print specified
by the <TU> command or TAG NOT FOUND
Error
For other errors, the product prints the error
message accordingly.