SATO CT4-LX User Manual

399
TAG NOT FOUND Error in RFID Write
Command
(1) Feed direction
(2) The dump for the first 16 or 32 bytes of the write data
The types of errors to print are as follows:
Message Cause and Countermeasure
TAG NOT FOUND
Error Message 1114 (Tag not Found)
WRITE TAG ERROR
Error Message 1115 (Write Operation Failed)
READ TAG ERROR
Error Message 1116 (Failed to Read the Tag Data)
VERIFY TAG ERR.
Error Message 1118 (Write/Read Values Are not Consistent)
LOCKING ERROR
Error Message 1119 (Failed to Lock the Data)
MULTI TAGS ERROR
Error Message 1121 (Multiple Tags Are Detected)
DIFFER EPC ERR.
Error Message 1122 (EPC Does not Match)
READ ONLY ERROR
Error Message 1123 (Write-Lock Tag Is Used or Power Is not
Strong Enough)
POWER NOT ENOUGH
Error Message 1126 (Not Enough Power)

SATO CT4-LX Specifications

General

Print Method	Thermal Transfer / Direct Thermal
Print Resolution	203 dpi
Max Print Width	4.09 inches (104 mm)
Media Type	Roll, Fan-fold
Media Thickness	0.0025 to 0.008 inches (0.0635 to 0.2032 mm)
Ribbon Width	0.98 inches (25 mm) to 4.09 inches (104 mm)
Ribbon Length	984 feet
Connectivity	USB, Ethernet, Bluetooth
Supported Barcode Types	PDF417, QR Code
Power Requirements	100-240 VAC, 50/60 Hz