Shimadzu GC-2014 Instruction Manual

16 Special Functions
16.6 GC Configuration
244
GC-2014
Q APC gas
If you select the APC gas for the flow signal selection to display the screen shown in Fig. 16.6.11.
■ AMC gas
If you select the AMC gas for the flow signal selection, the screen shown in Fig. 16.6.12
appears.
Fig. 16.6.11 APC gas signal setup screen
Fig. 16.6.12 AMC gas signal setup screen
The currently set channel No.
is displayed.
Select an item to be output
from each area.
The currently set channel No.
is displayed.
Select an item to be output
from each area.

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)