Shimadzu GC-2014 Instruction Manual

17 Printing
17.1 Printing
273
GC-2014
17.1.2.4 Time program and Pre-Run program
The time programs and Pre-Run programs can be printed as Event No. or parameter
names. To match Event No. and parameter names to screen items, refer to “17.3
Program Parameters” and “17.4 Event No.”
For all functions treated as events in the printout, the line No. is displayed as “0” regardless of the line
number.
Fig. 17.1.4
17.1.2.5 Batch schedule
Press [Print] (PF menu) to print the bach schedule as shown below.
Fig. 17.1.5
- GC TIME PROGRAM -
TIME FUNC VALUE LINE
0.0 EVNT 91.0 0
2.0 D1RG 1.0 1
3.0 D1RG 0.0 1
200.0 STOP 1990.0 0
- END -
- GC SAMPLE SCHEDULER -
START FINAL GC-FILE DP-FILE #INJ MK COMNAD
1 5 0 Ch.1-2 1 STANDARD STEST
6 15 0 Ch.1-2 3 UNKNOWN
- END -
NOTE

Shimadzu GC-2014 Specifications

General

Type	Gas Chromatograph
Display	LCD
Maximum Heating Rate	120°C/min
Data Acquisition	Digital
Maximum Number of Detectors	4
Weight	Approx. 45 kg
Carrier Gas	Helium, Nitrogen, Hydrogen
Detector Options	FID, TCD, ECD, FPD
Injection Port	Split/Splitless, On-column
Gas Control	Electronic Flow Control (EFC)
Temperature Programming Rate	0.1 to 120 °C/min
Power Requirements	230 V AC, 50/60 Hz
Detector Temperature Range	Up to 400°C (depending on detector type)