Studer OnAir 3000 User Manual

OnAir 3000 Digital Mixing Console
Operation 5-85
Document generated: 10.10.14
SW V6.0
5.5.2 Studio Monitoring
Studio1 Monitoring/TB Module:
Tel1
MONO
CUT
DIM
PFL
PFL / MON
MON
TB RETURN
MPX MASTER
PFL TO MON
ADD
SELECT
CR
RED LIGHT
DJ SP DJ
ON AIR CR 1 2 3
CONTROL ROOM
PGM
A
AUX 1 N–X 1 N–X 5
PGM
B
AUX 2 N–X 2 N–X 6
REC AUX 3 N–X 3 N–X 7
PFL CR AUX 4 N–X 4 N–X 8
EXT 2EXT 1 EXT 3
TALKBACK
AUX 1
AUX 2
AUX 3
PGM
A
PGM
B
REC
SLATEAUX 4
CR
ST 2
ST 3
EXT
TB
GRP 1
TB
GRP 2
TB
GRP 3
STORE
F 14F 12 F 13F 11
The studio 1 monitoring/TB modulesupports MPX conferencing but includes
control of the second PFL circuit as well as the ‘add’ mode and the rotary for
selection of monitoring sources. This allows the use of Studio 1 as a com-
pletely independent studio, e.g. in split mode or A/B mode for production of
a separate program.
Studio 2/3 Monitoring/TB Module:
MONO
CUT
DIM
FOLLOW CR
MONITOR MIC
TALKBACK
ON AIR
PGM
A
AUX 1 N–X 1 N–X 5
PGM
B
AUX 2 N–X 2 N–X 6
REC AUX 3 N–X 3 N–X 7
PFL CR AUX 4 N–X 4 N–X 8
EXT 2EXT 1 EXT 3
AUX 1
AUX 2
AUX 3
PGM
A
PGM
B
REC
SLATEAUX 4
CR
ST 1
ST .
EXT
TB
GRP 1
TB
GRP 2
TB
GRP 3
STORE
F 14F 12 F 13F 11
The monitoring/TB module for studio 2 and studio 3 has a reduced feature set,
offering an array of configurable buttons for monitoring source selection and
talkback destinations, red light indication, studio loudspeaker and headphone
control and connection. Talkback between any locations is possible, as well
as to external lines and to the master, AUX, and N–X outputs.

Studer OnAir 3000 Specifications

General

Brand	Studer
Model	OnAir 3000
Category	Music Mixer
Language	English