OnAir 3000 Digital Mixing Console
Operation 5-147
Document generated: 10.10.14
SW V6.0
Error Code Error Type Error Text / Comment
3102
Warning
GPIO, The GPIO function 3 does not work properly! Please check the selected arguments.
For GPInput functions:
Appears if arguments are missing
- during activation of a GPInput function in the ConfigGUI
- during execution of a GPInput function
- during power-up initialization
For GPOutput functions:
Appears if arguments are missing
- during activation of a GPOutput function in the ConfigGUI
- during power-up initialization
Note: Since in case of power-up and execution the Changer Ext ID is the GPIO Extension in the CORE, the
User Warning will be indicated on all Desks.
3104
Warning
GPIO, Snapshot File ‘myGlobalSnap’ not found. The GPIO function 3 does not work properly!
For GPInput and GPOutput functions:
Appears if the global snapshot specified in argument 3 of the GPInput/GPOutput function “Snapshot” is not
available during activation of a GPInput/GPOutput function in the ConfigGUI, and during power-up initial-
ization. Note: Since in case of power-up, the Changer Ext ID is the GPIO Extension in the CORE, the User
Warning will be indicated on all Desks.
5.12.4.5 AoIP
Error Code Error Type Error Text / Comment
3200
Warning
AoIP, No communication to local AoIP node with IP 192.168.0.10 on Livewire card in Slot 1 of Rack ‘Inter-
nal’. AoIP network ‘MyAudioNetwork’.
Appears during start-up, if the protocol dll for the corresponding network cannot establish TCP/IP communi-
cation to an AoIP node specified for a connector in the D21m.XML file.
3201
Warning
AoIP, Invalid Password specified in D21m.XML for local AoIP node with IP 192.168.0.10 on Livewire card in
Slot 1 of Rack ‘Internal’. AoIP network ‘MyAudioNetwork’.
Appears during start-up, if the protocol dll for the corresponding network is not able to login to the AoIP
node specified for a connector in the D21m.XML file.
3202
Warning
AoIP, Connection lost to local AoIP node with IP 192.168.0.10 on Livewire card in Slot 1 of Rack ‘Internal’.
AoIP network ‘MyAudioNetwork’.
Appears during operation, if the protocol dll looses TCP/IP connection to an AoIP node specified for a con-
nector in the D21m.XML file.
3203
Warning
AoIP, Cannot load Protocol DLL for ‘MyProtocol’. Missing file ‘MyProtocol.dll’. Network ‘MyAudioNetwork’
failed.
Appears during start-up, if the dll for the AoIP protocol specified in the AoIP.XML file cannot be found. The
indicated network is not instantiated.
3204
Warning
AoIP, Cannot handle multiple networks of the same protocol.
Network ‘MyAudioNetwork’ ignored.
Appears during start-up. If more than one network are defined using the same protocol in the AoIP.XML file.
The system ignores the indicated network definition.
3205
Warning
AoIP, Unknown Network Name ‘MyAudioNetwork’ specified in D21m.XML for local AoIP node with IP
192.168.0.10 on Livewire card in Slot 1 of Rack ‘Internal’.
Appears during start-up, if the specified NetworkName of the Connector Definition in the D21m.XML
doesn’t match any of the NetworkName(s) specified in the Network Definition within the AoIP.XML file.
3206
Warning
AoIP, Node Name ‘System X’ doesn’t comply with DNS naming convention. Changed Node Name to ‘Sys-
temX’.
Appears during start-up, if the Node Name (either derived from the system name or being defined in the
D21m.XML) doesn’t comply with the DNS naming convention.
3207
Warning
AoIP, Network Name ‘MyAudioNetwork’ is already used. Subsequent network ‘MyAudioNetwork’ ignored.
Appears during start-up. If more than one network are defined using the same network name in the AoIP.
XML file.
The system ignores the indicated network definition.
To Next Page
Loading...
Need help?
General
