OnAir 3000 Digital Mixing Console
Operation 5-157
Document generated: 10.10.14
SW V6.0
5.12.4.18 Audio Clock Card
Error Code Error Type Error Text / Comment
9100
Error
AUDIO CLOCK, No communication with Audio Clock Card.
Appears during power-up and runtime if communication to the AudioClockCard is lost.
9101
Warning
AUDIO CLOCK, Could not open port COM1
Appears during init phase if the specified COM port cannot be opened.
9102
Warning
AUDIO CLOCK, Clock reference changed to WordClock.
Appears during runtime if the Audio Clock Card changes the SyncSource autonomously.
The message appears only if SourceAutoSelect is ON.
9103
Error
AUDIO CLOCK, Missing external WordClock.
Appears during power-up and runtime if the clock specified by the SyncSource and SamplingFrequency is
not available. The console switches to internal clock.
The message appears only if SourceAutoSelect is OFF.
9104
Warning
AUDIO CLOCK, File ‘audioclock_ext.ini’ not found.
Appears during start-up if the audio clock extension cannot find its ini file. The extension is not started.
To Next Page
Loading...
Need help?
General
