OnAir 3000 Digital Mixing Console
5-78 Operation
Document generated: 10.10.14
SW V6.0
If a wrong password is entered, the login fails and a user warning pops up:
When a user logs in, the system generates an entry in the log file (V3.0).
Note: The factory default system administrator password is ‘admin’; it is recom-
mended that the system administrator modifies his password upon delivery
of the system with the configuration tool; for details refer to chapter 6.5.35.
5.4 Level Meters
The OnAir 3000’s main screen always displays two stereo level meter bar
graphs. They feature 130 segments each with configurable characteristics
and scale. The meter source can be selected by touching the label button just
below the corresponding meter (this opens a menu with all configured meter
sources).
Meter Mode There are six different meter characteristics with their appropriate scales
available, as shown below (British Standard and Digital FS Meter added with
SW V3.2). They can be selected in the configuration tool (Config/Settings/
Main Meter Mode, see chapter 6.5.14).
To Next Page
Loading...
Need help?
General
