Studer OnAir 3000 - Output Routing Keys; XL Section

OnAir Digital Mixing Consoles
Conguration 6-109
Document generated: 10.10.14
SW V6.0
6.5.30.3 Output Routing Keys
This page allows assigning up to 24 Partial Output Routings to the output
routing keys. Which hardware keys this will be on the desk must be defined
in the Desk_KeyMapping.xml file.
6.5.30.4 XL Section
The AUX bus required to listen to outside sources as well as the talkback
source location are defined on this page. Per default, AUX 1 is assigned to
the XL box in the control room, AUX 2 to the XL box in studio 1, AUX 3
to the one in studio 2, and AUX 4 to the one in studio 3. Source selection is
performed in the user GUI’s Route – XL Assign page.