OnAir Digital Mixing Consoles
Conguration  6-111
Document generated: 10.10.14
SW V6.0
6.5.31 Pro-Bel
The Pro-Bel extension provides an interface to remotely set or remove audio
connections in the output routing of a controlled device. A remote device can
send messages through a serial COM port or via TCP/IP, using the ‘Pro-Bel
General Switcher Communication Protocol’. This protocol provides a robust
and asynchronous method of controlling routers and is the preferred method
of communication.
Supported Physical Connections:
Protocol Serial via RS232/422 TCP/IP via Ethernet SW Version
SW-P-02
Yes Not supported V1.1
SW-P-08
Yes Yes V2.1.6
6.5.31.1 Settings
On this page the ‘connected’ or ‘disconnected’ user messages can be enabled
or disabled (default setting: Off).