Studer OnAir 3000 - 6.4 Configuration Tool

OnAir Digital Mixing Consoles
6-10 Conguration
Document generated: 10.10.14
SW V6.0
6.4 Configuration Tool
After having touched the Config Tool - Start button, a blank configuration
page appears, showing the collapsed configuration menu tree at the left.
The configuration parameters are divided in function groups. Each function
group can be selected and edited on separate pages (details in the following
chapters).
Notes: The optional Probel group only appears on consoles equipped with the option.
The optional Ember function group only appears on consoles equipped with
the option and having it configured in the .ini file.
Some of the menu tree items are supported by the OnAir 3000 only and will
not be displayed on an OnAir 1500 or 2500 console.