Studer OnAir 3000 - Strip Assign

OnAir Digital Mixing Consoles
Conguration 6-41
Document generated: 10.10.14
SW V6.0
6.5.20.6 Strip Assign
This page defines the presentation of the ROUT - Input page.
Input Routing Column shows the input groups displayed in the ROUT - Input page when touching
the Select Group field.
Desk Group 1-8 Columns shows the input groups displayed in the Chan - Input page when touching
the Input Selection button, or in the alphanumeric display in the fader strip
if the INP (input) function is selected on the fader assign module while the
fader strip rotary encoder is touched.
Selection is done as described in chapter 6.5.20.1.