OnAir 3000 Digital Mixing Console
5-144 Operation
Document generated: 10.10.14
SW V6.0
Error Code Error Type Error Text / Comment (SCL: SCore Live; CSC: Compact SCore)
2202
Info
CORE DRIVER, DSP card in slot 1 detected. Please make sure, the CORE is rebooted in order to achieve
system consistency.
Appears during runtime (not during power-up) when the user inserts a DSP card in a slot that was empty at
power-up.
2400
Error
CORE DRIVER, No communication to CORE.
Appears during power-up if the Bridge card does not respond to eGetCore or if it responds with eGetCor-
eFailure.
2403
Error
CORE DRIVER, DSP Card in slot 1 failed! Card has been reset.
Appears during runtime if a DSP card with I/O fails (the watchdog of the VDCA detects a failure of one of
the DSPs) but the functionality can be re-established by resetting the card (the Bridge Card tries to reset a
DSP Card up to 3 times). (eFailedIoDspCardResetted)
2404
Error
CORE DRIVER, DSP Card in slot 1 failed! Code reloaded to redundant card in slot 6. Connect HD Link
cables of DSP slot 1 to DSP slot 6!
Appears during runtime if a DSP card with I/O fails (the watchdog of the VDCA detects a failure of one of
the DSPs) after a DSP card was previously reset once. The tasks will be migrated to a redundant DSP card
that was not reset before. (eFailedIoDspCardLoadedTo)
2405
Error
CORE DRIVER, Communication to CORE lost.
Appears during runtime if no ‘heartbeat’ has been received from the Bridge Card for more than 5 seconds.
2406
Info
CORE DRIVER, Bridge Card firmware was downloaded. This will take effect after next restart of Core.
Appears during runtime if the Bridge Card firmware was downloaded.
To Next Page
Loading...
Need help?
General
