OnAir 3000 Digital Mixing Console
Operation 5-153
Document generated: 10.10.14
SW V6.0
Error Code Error Type Error Text / Comment
8102
Warning
CAB (Monitora protocol), Could not open port COMX.
Appears during init phase if the specified COM port cannot be opened. This can happen if the ProBel con-
troller extension is running within the same container as the CAB extension.
8103
Warning CAB (Monitora protocol), SELECT_SOURCE failed: No free DSP channel.
8104
Warning
CAB (Monitora protocol), Invalid Logic Assignment configuration for input LI1: item. Assignment is ignored.
Appears if any errors regarding Logic Assignments are found during parsing of the cab_interfaces.ini file.
Possible items:
- Monitora command not availble
- Level producer not available
- Logical Input not available
To Next Page
Loading...
