OnAir 3000 Digital Mixing Console
Operation 5-159
Document generated: 10.10.14
SW V6.0
  • Theshort MulticastGroups.ini file defines which addresses are used
for multicast communication. If the default addresses are not ok, please
ask your IT/network administrator for assistance and modify them. The
default MulticastGroups.ini file is shown below.
################################################
# Define here multicast groups that will
# be joined to receive container infos.
MulticastGroup = 239.255.0.1
MulticastGroup = 239.255.0.2
MulticastGroup = 239.255.0.3
#
################################################
  • Generateashortcutto SystemViewer.exe and move it to your desktop
for a convenient start of the tool.
  • Installationiscompletenow.
Operation Start the System Viewer either by a click on its desktop icon (shown left) or
on SystemViewer.exe within in its folder. The System Viewer window will
look similar to the screenshot below.
As you can see, this is a fairly large networked system. The list can be sorted
per column, as familiar from Windows operation, by clicking on the title bar
of the desired column.
In case of a network problem, the System Viewer window will be empty.
To Next Page
Loading...
Need help?
General
