OnAir 3000 Digital Mixing Console
5-164 Operation
Document generated: 10.10.14
SW V6.0
Operation Start the Remote Console application by a double-click on either the desktop
shortcut (shown left) or directly on
RemoteConsole.exe in its folder. If
everything is correct, the Home page of your console will pop up:
On from here, the console can be operated as usual. In case of a network
problem, only the Home and the Login buttons are displayed at the upper
edge of the page. This will then look as shown below:
Operation with Multiple Systems: It is as well possible to control more than one OnAir console from a single
computer, provided that these consoles are located in the same network as
the computer. To do so, just copy the Release RemoteConsole folder as
many times as needed to your computer, edit every container.ini file
approprietly and generate a desktop shortcut for every console. Up to 3
Remote Console applications may run simultaneously if no System Viewer
application or Remote Configuration tool is used at the same time.
To Next Page
Loading...
Need help?
General
