To Next Page

To Previous Page

OnAir 3000 Digital Mixing Console

Operation 5-167

Document generated: 10.10.14

SW V6.0

# (virtual Strip Channels)

# containerid = 150 : Secondary DESK (parallel)

# containerid = 151 : Standalone DeskDriver of the Secondary Desk

# containerid = 160 : CHANNEL Screen of the Secondary Desk for Channels 1..6

# containerid = 161 : CHANNEL Screen of the Secondary Desk for Channels 7..12

# containerid = 162 : CHANNEL Screen of the Secondary Desk for Channels 13..18

# containerid = 163 : CHANNEL Screen of the Secondary Desk for Channels 19..24

# containerid = 164 : CHANNEL Screen of the Secondary Desk for Channels 25..30

# containerid = 165 : CHANNEL Screen of the Secondary Desk for Channels 31..36

# containerid = 166 : CHANNEL Screen of the Secondary Desk for Channels 37..42

# containerid = 167 : CHANNEL Screen of the Secondary Desk for Channels 43..48

# containerid = 168 : CHANNEL Screen of the Secondary Desk for Channels 49..54

# (virtual Strip Channels)

# containerid = 169 : CHANNEL Screen of the Secondary Desk for Channels 55..60

# (virtual Strip Channels)

# containerid = 240 : DNet TestFramework

# containerid = 254 : SNMPAgent

containerid = 20

# The containername identifies this container in a readable way

# and must be unique within the mixing console system. It is recommended

# not to use more than 8 characters due to visualization aspects.

# “Undefined” is not allowed!

containername = “CnfgTool”

# Multicast

# ---------

# If you use IGMP multicasts instead of broadcasts in your network,

# you have to uncomment the the lines below. It is possible, that a

# container is member of one or more than one multicast groups.

# NOTE: For an optimal performance, make sure that all network ressources

# (Switches, Routers...) support IGMP.

# NOTE: To avoid IP conflicts, check the available addresses for

# multicast groups (www.iana.org). Use preferable addresses from the

# local scope (239.255.0.0/16) described in RFC 2365.

# NOTE: If the multicast should reach computers beyond the local subnet

# Set MulticastTimeToLive > 1 (1 is default)

# MulticastGroup = 239.255.0.1

# MulticastGroup = 239.255.0.2

# MulticastGroup = 239.255.0.3

# MulticastTimeToLive = 1

# Multiple Network Adapters, Multiple IP Addresses

# ------------------------------------------------

# When more than one network adapter is enabled on the computer,

# the MAC Address has to be specified.

# If the desired network adapter has more than one IP address assigned belonging to different

# subnets, the network address has to be specified.

# Remark:

# If the network address is specified and there is no other network adapter which has an

# IP address in the desired network, it is not necessary to specify the MAC address.

Brand	Studer
Model	OnAir 3000
Category	Music Mixer
Language	English

Studer OnAir 3000 User Manual

Table of Contents

Other manuals for Studer OnAir 3000

Questions and Answers:

Studer OnAir 3000 Specifications

Related product manuals