OnAir 3000 Digital Mixing Console
5-176 Operation
Document generated: 10.10.14
SW V6.0
6 The Login File window pops up; select the new user from the User: drop-
down menu:
7 Click on Create File.
The newly created Login.ID file is saved in the same folder that contains
the Remote Config Tool application.
8 Copy it from there to the user’s USB stick.
When opening this file with a text editor such as Notepad, you will see its
contents: the user’s name and his encrypted password:
Note: If no password is needed for a user, the procedure described above can be
skipped; the file can then also be created in a text editor without using the
Remote Config Tool. Just copy the syntax exactly, enter the user name and
To Next Page
Loading...
