OnAir Digital Mixing Consoles
Conguration  6-117
Document generated: 10.10.14
SW V6.0
the system administrator (Admin, user no. 1) and the default user (Default,
user no. 2) separate pages are available, as mentioned above. If more than
64 users and/or more than 16 policies are required, central user management
must be used (refer to chapter 5.10.9).
When touching one of the Username or Password fields, the same keyboard
appears that is used for label entries. Please note that the password is case-
sensitive – this is important for correct user log-in.
By setting User Valid to Off, access for a particular user can be blocked.
Users – Policies For managing user access rights, one or more Policies may be assigned to
all users except the Admin and Default users. If more than one policy is
assigned to a user, this results in a logical OR combination of the policies.
For more information on user privileges and policies, please refer to chapter
5.10. Policies can be assigned as described in chapter 6.5.20.1.
Users – Departments For snapshot management, one or more departments can be assigned to each
user. In addition, it can be defined whether the user can only read snapshots
from a certain department (Read Only), or whether he is allowed to modify
or create department snapshots (Read/Write).
To Next Page
Loading...
Need help?
General
