7-4 A/B Desk Configuration
OnAir 3000 Digital Mixing Console
Document generated: 10.10.14
SW V6.0
initial... files All initial... files together form the initial snapshot required for
console startup. They are located on the Compact Flash card on the SCore
container. They cannot be edited, since they are binary files.
All settings done in the Configuration Tool are saved to the initial...
files. During start-up, these files are read and the console is initialized accord-
ingly.
File name Container Location Contents
initial.cfg
Core, desk,
channel
screen
Win CE:
\Hard Disk\OA3000\snapshots
• All parameters of the configuration type, set by the
Configuration Tool (core, desk, channel screen)
• All I/O sharing-relevant parameters set by the Con-
figuration Tool (core)
initial.ops
Core, desk Win CE:
\Hard Disk\OA3000\snapshots
• Same parameters as an audio snapshot (core)
• Same parameters as the input routing snapshot
(core)
• Same parameters as the output routing snapshot
(core)
• Same parameters as the assignment snapshot
(desk)
• Monitoring parameters like CR, ST1..3 source
(core)
• Desk resource definition parameters (desk)
• Partial output routing snapshots
initial.usr
Core Win CE:
\Hard Disk\OA3000\snapshots
• All user-relevant parameters set by the Configura-
tion Tool (core)
• All policies-relevant parameters set by the Configu-
ration Tool (core)
• All department-relevant parameters set by the Con-
figuration Tool (core)
initial.key
Core Win CE:
\Hard Disk\OA3000\snapshots
• All license keys for optional software functions
(core)
Note: This is the only file that belongs to the initial
snapshot but is not handled by the snapshot exten-
sion
To Next Page
Loading...
Need help?
General
