Capintec CAPTUS 3000 User Manual

CAPINTEC, INC. CAPTUS
®
3000
Figure 10-55
3. Click the
button or press Alt+S to begin the test. Figure 10-56 will appear
confirming the selected patient. To cancel the test or if the incorrect patient was selected,
click the
button to return to Figure 10-49, otherwise click to
continue.
Figure 10-56
4. First, the screen prompts you to measure background counts as shown in Figure 10-58.
Note: If the background has recently been counted, then the screen shown in Figure 10-
57 will appear. To skip counting the background again and proceed to step 5,
click the
button or press the Y key. To re-measure the background,
click the
button or press the N key. The screen shown in Figure 10-58
will appear.
November 13 LAB TESTS 10-39

Capintec CAPTUS 3000 Specifications

General

Brand	Capintec
Model	CAPTUS 3000
Category	Medical Equipment
Language	English