CAPINTEC, INC. CAPTUS
®
3000
Figure 10-57
Figure 10-58
To begin counting, verify that there are no radioactive sources nearby and click the
button. To abort the measurement, click the button and the
screen will return to that shown in Figure 10-55. To exit to main Cr51 Blood Volume test
screen, click the button or press Alt+E. To begin the test again, click the
button or press Alt+S.
5. The screen appears as shown in Figure 10-59, prompting you to measure the whole
blood standard.
Figure 10-59
To begin counting, place the standard in the well and click the button. To quit
counting, click the
button. This will provide a prompt to abort the patient test,
as shown in Figure 10-60.
Figure 10-60
10-40 LAB TESTS November 13
To Next Page
Loading...
