Compulite Spark User Manual

Assigning Memories
Spark
12-5
Assigning a range of memories to sequential
controllers
Example: assign memories 30 - 35 to controllers 6 - 11.
Keypresses Results/Comments
1. Select memories 30 Æ 35.
2.
Press [ASSIGN
The message
Assign Key Expected is displayed.
3. Press controller 6’s SK. Memory 30 is assigned to controller 6, memory
31 to controller 7, etc.
Assigning an unspecified range of memories to
sequential controllers
Example: Assign memory 17 to controller 7, memory 18 to controller 8, memory 19 to
controller 9, until all the available controllers have been assigned.
Keypresses Results/Comments
1. Select Memory 17 as the
starting memory.
2. Press [ Æ
Æ
]
It is unnecessary to select the last memory in
the range, as this cannot exceed the number
of controllers.
3.
Press [ASSIGN]
The message
Assign Key Expected is
displayed.
4. Press the controller 7’s SK. Memory 17 is assigned to controller 7,
memory 18 to controller 8, and so on finishing
with memory 30 assigned to controller 20.
Assigning masks
Use Mask to assign the channels and spots in a memory as a group assignment.
Example: Assign the channels and spots in memory 1 as a group assignment to controller
7.
Keypresses Results/Comments
1. Press [MASK]
2. Enter 1 on the numeric
keypad.
3.
Press [ASSIGN]
The message
Assign Key Expected is
displayed.
4. Press the controller 7’s SK. The assignment is recognized as a group. Grp
appears on the controller display.

Compulite Spark Specifications

General

Brand	Compulite
Model	Spark
Category	Controller
Language	English