The Macro Menu
Spark
18-4
Modifying Macros
Modify Macros by deleting an erroneous entry or inserting a new entry. New entries are
inserted in front of the cursor.
Keypresses Results/Comments
1. Go to the Macro menu.
2. Press F3 Modify
The prompt asks which Macro is to be
modified.
3. Enter the Macro number. A window opens displaying the selected
Macro.
4. Use the arrows (F2 and F3)
to position the cursor over
the error for deletion or the
position for an additional
keypress.
5. If you are erasing an entry
press [CE].
If you are adding a keypress,
press it now.
6. Press F1 Store Macro
The modified Macro is displayed in the Macro
List.
Linking Macros
One Macro may be linked to another Macro. Linked Macros operate with a single
keypress.
Linked Macros must be the last entry in the Macro sequence.
Example: Macro 12 is linked to Macro 50.
Keypresses Results/Comments
1. Press F1 Create
2. Press F6 Macro #
3. Enter the Macro number on
the keypad. In this case, 050.
4. Execute desired keystrokes Remember that up to 40 keystrokes are
allowed and leave room for the linked Macro.
5. Press F6 More Function
6. Press F5 Macro #
This option permits linking a Macro.
F6
is
added to the Macro sequence.
7. Enter the Macro number on
the keypad; in this case, 012.
8. Press F1 Store
Operating Macro 50 selects Macro 12 and
allows its operation.