Compulite Spark User Manual

The DMX Input patch
Spark
24-4
Example 2: Patch channel 55 to DMX Input channel 10, channel 56 to DMX Input
channel 11, channel 57 to DMX Input channel 12, channel 58 to DMX Input channel 13.
Keypresses Results/Comments
1. Go to the Channel Patch
menu.
2. Press F6 More and F3
Input Patch
The Input Patch Table is displayed.
3. Press F1 Assign Input
Spark prompts for an input channel number
4. Enter 10 on the numeric
keypad.
5. Press F1 Thru Input
Spark prompts for an input channel number
6. Enter 13 on the keypad.
7. Press F2 To Channel
Spark prompts for a channel number.
8. Enter 55 on the keypad.
9. Press F1 Store
The input assignments appear in red on a white
field below the channel number.
Clearing Input patch assignments
You have the option of clearing the Inputs or the system Channels. The example below
shows how to clear Input assignments.
Keypresses Results/Comments
1. Press F2 Clear Input
2. Press F1 Inputs
3. Enter a number in answer
to the prompt.
More than 1 input channel may be selected
at this time.
4. Press F1 Store
The assignment is cleared.
Returning to the default patch
You can return the entire Patch Table or selected patches to the 1-to-1 default DMX Input
Patch
Example: Reset the entire patch.
Keypresses Results/Comments
1. Press F3 Default (1 to 1)
2. Press F1 All Patches
Spark asks
Are you Sure?? .
3. Press F1 Yes
All assignments are returned to default.

Compulite Spark Specifications

General

Brand	Compulite
Model	Spark
Category	Controller
Language	English