Selecting and Editing Scrollers
Spark
5-6
Selecting and Editing Scrollers
If your system definition includes scrollers, the channel display shows a small 's' next to
the channel number, indicating that this channel is a two parameter channel; One
parameter being intensity and the other the scroller frame number.
If you have taken advantage of the Scroller Patch (see Chapter 20), scrollers are addressed
by the channel number of the lighting fixture on which they are mounted.
The channel area of the stage display shows the channel and associated scroller
information. Underneath the intensity level, the current frame position of the scroller is
shown.
Color code for scroller channels
Color What it means
Dark gray
Tracking
Red Scroller channels selected in the editor. The frame value is displayed
in green.
White Scroller channels present in the editor. The frame value is displayed in
green.
Blue or
orange
Scroller channels output from A/B or controllers. The frame value is
displayed in green.
When no frame value is assigned to a scroller, the current frame is determined by the
tracking.
To Next Page
Need help?
General