Compulite Spark User Manual

Operating Snaps
Spark
17-7
Operating Snaps in forcing mode
A forcing mode Snap affects all Controller assignments, regardless of their output level.
Referring to the example above, the group assignment to controller 8 bumps out the
assignment on controller 8 and is, of course, immediately active on-stage.
Unassigned Controllers in the Snap free current assignments regardless of their output
level. Example: Controllers 1 – 8 are currently assigned. Some of the controllers are active
and some are not. In the Snap controllers 1 – 8 have no assignments. When you operate
this Snap in forcing mode the assignments on controllers 1 – 8 are freed.
A/B assignments are not influenced by Snaps operated in forcing mode.
Keypresses Results/Comments
1. Press [SNAP]
Snap appears in the command line.
2. Press [+]
3. Select the snap number on
the numeric keypad.
4. Press [ENTER]
'Snaps' all the assignments recorded in Snap 1
into place regardless of the playback devices’
output status.
Snaps 1 – 20 can be operated using the Soft Keys in Snap mode.
Keypresses Results/Comments
1. Press [SNAP]
Skip this step if the SK mode is Snap.
2. Press and hold [SHIFT]
Snap + is displayed under the SK mode.
3. Press the SK of the Snap. 'Snaps' all the assignments recorded in the
selected Snap into place regardless of the
playback devices’ output status.
Using Snap to clear all assignments
You can use Snap to free controller and A/B assignments.
Keypresses Results/Comments
1. Press [SNAP]
2. Press [0]
Snap Free all panel!! is displayed in the
command line. The message
Are you Sure? is
displayed.
3. Press [ENTER]
All playback device assignments are freed.

Compulite Spark Specifications

General

Brand	Compulite
Model	Spark
Category	Controller
Language	English