Diagnostics
The diagnostic function (F4) provides 3 tests for hardware, each for a separate part of the
system.
1. F3 CRT's & PANEL - This tests the panel by flashing all the LEDs on keys, checks
the LED displays, and shows a color chart on CRT.
Press [RESET] to return to the main Diagnostic menu.
2. F4 KEYBOARD TEST - Displays a map of all the wheels, controllers, the trackball,
the A/B crossfaders, and the General Master, which are tested by moving them. The
lower right corner of the display has a small window for checking the keystrokes of the
main console keys, Submaster Wing, Macro Extension Keyboard, Remote Control, and
the alphanumeric keyboard. Numbers run on the LED displays.
Press [RESET] to return to the main Diagnostic menu.
3. F5 MEMORY TEST - Provides two different memory tests. Pattern (F1), which will
check the memory while retaining all the current show data and Warm (F2), which
loses all the current show data.