Compulite Spark User Manual

Using the Copy Function
Spark
7-7
Copying channel intensities from a memory
Example: Copy the intensity value assigned to channel 5 in memory 3 to channels 20 – 25.
Keypresses Results/Comments
1. Select channels 20 – 25. Select the target channels.
2. Press [COPY]
Copy from appears in the command line.
3. Select memory 3.
4. Select channel 5. Select the channel being copied from.
5. Press [ENTER]
The intensity is copied to channels 20 – 25.
Copying scroller frames from the editor
Example: Copy the frame assigned to scroller channel 5 to scroller channels 20 – 25. The
example below assumes that channel 5 is assigned a frame value in the editor.
Keypresses Results/Comments
1. Select channels 20 Æ 25. Select the target channels.
2. Press [FRAME]
3. Press [COPY]
Copy from appears in the command line.
4. Select channel 5. Select the channel being copied from.
5. Press [ENTER]
The channel 10’s assignment is copied.
Copying scroller frames from a memory
Example: Copy frame assignments to channel 5 in memory 3 to scroller channels 20 – 25.
Keypresses Results/Comments
1. Select channels 20 – 25. Select the target channels.
2. Press [FRAME]
3. Press [COPY]
Copy from appears in the command line.
4. Select memory 3
5. Select channel 5. Select the channel being copied from.
6. Press [ENTER]
The channel 5’s assignment is copied.

Compulite Spark Specifications

General

Brand	Compulite
Model	Spark
Category	Controller
Language	English