Disabling LTP control mode
Keypresses Results/Comments
1. Press [MENU] [8] [ENTER]
You are now in the System Parameters menu.
2. Go to the System
Parameters menu.
3. Use the [F2] or [F3] (the
arrow keys) to place the
cursor on
Latest Takes Precedence
.
4. Press F1 Enter
5. Press F2 Off The
LTP
flag disappears from the Playback
display. Spark is now working in default priority.
¾
¾
Tip
You can make a macro, using Teach Macro, for single press access to enable and disable
LTP.
Viewing the control priority
The Control Priority is displayed on the first help screen. When LTP is disabled the Control
Priority does not change. When LTP is enabled the Control Priority display changes
according to rules described above.
To view the current Control Priority:
Press
[HELP]
To Next Page
Loading...
Need help?
General