Edge-Core ECS3510-26P User Manual

C HAPTER 4 | Basic Management Tasks
Resetting the System
– 123 –
◆ Refresh – Refreshes reload information. Changes made through the
console or to system time may need to be refreshed to display the
current settings.
◆ Cancel – Cancels the current settings shown in this field.
System Reload Configuration
◆ Reload Mode – Restarts the switch immediately or at the specified
time(s).
■
Immediately – Restarts the system immediately.
■
In – Specifies an interval after which to reload the switch.
(The specified time must be equal to or less than 24 days.)
■
hours – The number of hours, combined with the minutes,
before the switch resets. (Range: 0-576)
■
minutes – The number of minutes, combined with the hours,
before the switch resets. (Range: 0-59)
■
At – Specifies a time at which to reload the switch.
■
DD - The day of the month at which to reload. (Range: 1-31)
■
MM - The month at which to reload. (Range: 01-12)
■
YYYY - The year at which to reload. (Range: 1970-2037)
■
HH - The hour at which to reload. (Range: 0-23)
■
MM - The minute at which to reload. (Range: 0-59)
■
Regularly – Specifies a periodic interval at which to reload the
switch.
Time
■
HH - The hour at which to reload. (Range: 0-23)
■
MM - The minute at which to reload. (Range: 0-59)
Period
■
Daily - Every day.
■
Weekly - Day of the week at which to reload.
(Range: Sunday ... Saturday)
■
Monthly - Day of the month at which to reload. (Range: 1-31)

Edge-Core ECS3510-26P Specifications

General

Brand	Edge-Core
Model	ECS3510-26P
Category	Switch
Language	English