Edge-Core ECS3510-26P User Manual

C HAPTER 38 | Domain Name Service Commands
– 948 –
Name Server List:
Console#
RELATED COMMANDS
ip domain-list (945)
ip name-server (949)
ip domain-lookup (946)
ip host This command creates a static entry in the DNS table that maps a host
name to an IPv4 address. Use the no form to remove an entry.
SYNTAX
[no] ip host name address
name - Name of an IPv4 host. (Range: 1-100 characters)
address - Corresponding IPv4 address.
DEFAULT SETTING
No static entries
COMMAND MODE
Global Configuration
COMMAND USAGE
Use the no ip host command to clear static entries, or the clear host
command to clear dynamic entries.
EXAMPLE
This example maps an IPv4 address to a host name.
Console(config)#ip host rd5 192.168.1.55
Console(config)#end
Console#show hosts
No. Flag Type IP Address TTL Domain
---- ---- ------- -------------------- ----- ------------------------------
0 2 Address 192.168.1.55 rd5
Console#

Edge-Core ECS3510-26P Specifications

General

Model	ECS3510-26P
Type	Managed
PoE Ports	24
Switching Capacity	128 Gbps
Forwarding Rate	95.23 Mpps
MAC Address Table Size	16K
VLANs	4K
Power Supply	100-240VAC, 50-60 Hz
Dimensions	440 x 260 x 44 mm
Ports	24 x 10/100/1000BASE-T + 2 x 10G SFP+
Layer	Layer 2+