Fujitsu PRIMERGY TX300 S7 - Page 270

270 Upgrade and Maintenance Manual TX300 S7 / RX350 S7
Hard disk drives / solid state drives
Figure 151: 4x 3.5-inch HDD extension box power cabling
Ê Connect the 8-pin connector on power cable T26139-Y3939-V202 to power
backplane connector X22 (1).
Ê Connect the 4-pin connector X1 to SAS backplane connector X7 (2).
Ê Store the remaining cable end (connector X2) under the 4x 3.5-inch HDD
extension box as shown (3).
4x 3.5-inch HDD
extension box power
cable
Y3939-V202
26
Power backplane
connector X22
8-pin cable connector
4x 3.5-inch HDD
extension box SAS
backplane connector
X7 (HDDs 3, 6, 9, 12)
Cable connector X1
(connector X2
remains unused)
16.2.6
Cable
(T26139-)
Cabling
list no.
from to
Cabling
plan