Fujitsu PRIMERGY TX300 S8 User Manual

274 Upgrade and Maintenance Manual TX300 S8 / RX350 S8
Hard disk drives / solid state drives
Figure 179: Removing the 3.5-inch HDD bay top cover (B)
Ê Slide back the intrusion switch holder until it disengages from the HDD bay
top cover (1).
Ê Remove the intrusion switch holder (2) and set aside.
Ê Leave the intrusion switch cable connected to the system board.

Fujitsu PRIMERGY TX300 S8 Specifications

General

Brand	Fujitsu
Model	PRIMERGY TX300 S8
Category	Server
Language	English