Fujitsu PRIMERGY TX300 S8 - Page 401

TX300 S8 / RX350 S8 Upgrade and Maintenance Manual 401
Expansion cards and backup units
Installing a secondary GPGPU / coprocessor card
Figure 291: Installing the secondary coprocessor card (Intel)
Figure 292: Installing the secondary GPGPU card (Nvidia)
Ê If applicable, insert the second GPGPU / coprocessor card into PCI slot 8
and press down firmly until it is fully seated in the slot.
Ê Secure the secondary card in the chassis according to the primary
GPGPU / coprocessor card.
for Intel
for Nvidia